Moje kontaktní osoba
Hennlich s.r.o.

Českolipská 9

Litoměřice 412 01

Fon +420 416 711 333

Fax +420 416 711 999

3D print filaments for maximum service life

Up to 50 times more abrasion resistant than standard filaments
iglidur® 3D print filaments are special filaments for special requirements. They have lower coefficients of friction than conventional 3D print materials and are suitable for special tasks depending on the material. The offer ranges from 3D print materials for simple processing with very good wear values, and filaments with very good friction properties, high strength and elongation, up to chemically resistant materials and those that are suitable for additive production processes according to the "fused layer manufacturing" (FDM/FFF). You can directly install printed parts such as plain bearings or worm gears and put them to industrial use – in the prototype phase or in serial production.
 
iglidur® filaments can be processed on all commercial printers. All methods that ensure that ABS materials adhere to the print bed also apply for igus® special filaments.

Produkty

Filtr

Základní požadavky
Requirements
Material

Počet výrobků: 7

iglidur® I180-PF, filament for 3D printing
  • Versatile use: good combination of high wear resistance, strength and temperature resistance
  • Good processing ability with an enclosed printer and igus® adhesive film
  • Also available in black (iglidur® I180-BL)
  • Flexural strength: 46 / 33 MPa 

od 59,00 USD / ks

K dispozici na požádání
'Na stránku výrobku
iglidur® I180-PF-BL, 3D printer filament
  • Versatile use: good combination of high wear resistance, strength and temperature resistance
  • Good processing ability with an enclosed printer and igus® adhesive film
  • Colour black
  • Flexural strength: 46 / 33 MPa 

na požádání

K dispozici na požádání
'Na stránku výrobku
iglidur® I170-PF, filament for 3D printing
  • Improved abrasion-resistance
  • High-quality processing: suitable for experts
  • Flexural strength: 33 / 17 MPa 

od 61,00 USD / ks

K dispozici na požádání
'Na stránku výrobku
iglidur® J260-PF, filament for 3D printing
  • Maximum service life of the Tribo-Filament
  • Very good coefficient of friction for low or medium loads
  • Higher temperature resistance up to 120°C
  • High-quality processing: suitable for experts
  • Flexural strength: 41 / 13 MPa 

od 64,00 USD / ks

K dispozici na požádání
'Na stránku výrobku
iglidur® I150-PF, filament for 3D printing
  • Food contact approved
  • The easiest to process Tribo-Filament
  • High abrasion resistance at low surface speeds 
  • Good mechanical properties
  • Cost-effective
  • Compliant with EC directive 10/2011
  • Flexural strength: 54 MPa 

na požádání

K dispozici na požádání
'Na stránku výrobku
iglidur® C210-PF, filament for 3D printing
  • High chemical resistance
  • High abrasion resistance
  • High-quality processing: suitable for experts
  • Flexural strength: 38 MPa 

na požádání

K dispozici na požádání
'Na stránku výrobku
iglidur® J350-PF, filament for 3D printing
  • high wear resistance
  • fulfils the demands regarding fire protection of the US Federal Aviation Administration (FAA)
  • lubrication and maintenance free
  • higher temperature resistance up to 180 °C (permanently)
  • High-quality processing: suitable for experts

 
 

na požádání

K dispozici na požádání
'Na stránku výrobku

Poradenské služby

We would be happy to answer your questions personally

Přeprava a konzultace

Osobně:

Pondělí až pátek od 7:00 do 20:00.
Sobota od 8:00 do 12:00.

Online:

24h