Vyberte místo pro doručení

Výběr stránky země/oblasti může mít vliv na různé faktory, jako jsou cena, možnosti dopravy a dostupnost produktu.
Moje kontaktní osoba
HENNLICH s.r.o.

Českolipská 9

Litoměřice 412 01

+420 416 711 333
CZ(CS)

Spherical thrust bearing, SAM, igubal®

  • To compensate for edge loads

Nejste si jisti, zda se hodí?

Product description
igubal® spherical thrust bearings
 
igubal® self-aligning spherical thrust bearings are very easy to fit and help to compensate for alignment errors and prevent edge loads. The ball pan consists of the impact-resistant, rigid, thermoplastic igumid G composite material.
The spherical washer consists of an iglidur® W300 as a standard. This combination results in particularly good friction and wear characteristics during relative movements.
  • Easy installation
  • Compensation of misalignment errors
  • Compensation of edge loads
  • Very good friction and wear properties
When to use it?
  • If you want to save weight
  • If corrosion resistance is requested
  • If a bearing with a good coefficient of friction is required
When not to use it?
  • At very high loads
  • If temperatures are higher than +80 °C
  • If a high rotational speeds have to be achieved
  • If gliding speeds higher than 0.5 m/s are required
Use our filter options to find the suitable product
Loads
 
The load capacity of igubal® spherical thrust bearings is very high for standard ambient temperatures. For high continuous loads and high temperatures, the load capacity of the thrust bearings should be tested in an experiment that simulates the application.
Assembly
 
The housing pad is installed in such a way that it is countersunk and secured. The spherical washer is loosely fitted in the pad and is held in place by the shaft that is placed into the bearing.
Technická data
Ke stažení

Jiná rešení

Poradenské služby

Preprava a konzultace

Osobne:

Pondelí až pátek od 7:00 do 20:00.
Sobota od 8:00 do 12:00.

Online:

24h

The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.